Briefs: Imaging
Articles: Propulsion
Application Briefs: Defense
Briefs: Semiconductors & ICs
Articles: Weapons Systems
Articles: AR/AI
A European company has developed time-saving simulation software for users of the University of Michigan’s Mcity CAV (connected and autonomous vehicle) testing facility in Ann Arbor. It has...
Articles: Electronics & Computers
Briefs: Defense
Matrix-assisted laser desorption/ionization (MALDI) is a soft ionization technique that is widely applied in the characterization of large biomolecules using...
Articles: Sensors/Data Acquisition
Turbine flow meters have long been a preferred technology for obtaining precise measurements of fluid flow in the aerospace industry. In addition to their high...
Briefs: Test & Measurement
The objective of this research was to hydraulically pressurize the internal diameter of one 102mm Polymer Matrix Composite (PMC) over-wrapped cylinder up to 25,000 pounds per...
Briefs: Energy
The Toxic Industrial Chemical/Toxic Industrial Material (TIC/TIM) Task Force MFR#1 published in February 2009 focuses on inhalation hazards in an operational environment and provides a list...
Briefs: Test & Measurement
After extensive review from the US Army Research Laboratory (ARL) Electrical Safety Office, it was...
Briefs: Robotics, Automation & Control
The US Army Research Laboratory (ARL), US Army Tank Automotive Research Development and Engineering Center (TARDEC), DCS Corp., and Naval Surface...
Briefs: Manufacturing & Prototyping
The advancement of robot capabilities and functionality has changed the way in which soldiers perform many of their...
Briefs: Aerospace
Method 522.2 of MIL-STD-810G CN1 defines ballistic shock as “a high-level shock that generally results from the impact of projectiles or ordnance on armored combat vehicles”. Typical...
Briefs: Aerospace
Knowledge of the physical properties of materials is critical for understanding their behavior in the environment as well as...
Application Briefs: Defense
Bethesda, MD
817-777-6148
For more info click here
The U.S. Air Force recently authorized extending the service life of the Lockheed Martin F-16's designed service life to 12,000 Equivalent...
Briefs: Imaging
An effort has been made within the US Army Research Laboratory (ARL) to extract quantitative information on explosive performance from high-speed imaging of explosions. Explosive fireball surface...
Briefs: Aerospace
ARL's Intelligent Systems Enterprise vision is to enable the teaming of autonomous...
Application Briefs: Defense
Trelleborg Sweden
+46 410 670 00
www.trelleborg.com
Trelleborg Sealing Solutions has designed and built a new airframe/engine seal fire test facility...
Briefs: Aerospace
As part of Project Agreement on Military Operations in Urban Terrain (MOUT), the US Army Research...
Articles: Data Acquisition
A modern aircraft includes multiple intelligent subsystems that aid in communication, navigation, and surveillance. These subsystems, called line replaceable...
Briefs: Defense
As the military adopts more networked...
Application Briefs: Aerospace
Burlington, Ontario, Canada
905-633-4000
www.wescam.com
The MX™-15D designating turret from L-3 WESCAM was successfully used during a weapons demonstration on the Bell Boeing V-22...
Technology Update: Defense
Since it first became an active cold-weather testing facility in 1947, the 96th Test Wing's McKinley Climatic Laboratory at Eglin Air Force Base, FL, there have been a wide variety of...
Briefs: Materials
A thin, uniform coating on long segments of monofilament could drastically improve the functionality of many complex fibers. A length of fishing line, microtubing, or polylactic...
Briefs: Aerospace
Coatings that impart hydrophobic properties are of considerable interest. For applications such as aircraft windows, optical components, protective...
Briefs: Physical Sciences
US national and many international hearing conservation programs (HCPs) have adopted a noise exposure criterion of 85 dBA for a time-weighted average of 8 hours, with a 3...
Briefs: Manufacturing & Prototyping
Fleet piping systems are complex, space-constrained systems that are difficult to inspect using standard external inspection techniques. Pipe lagging, as well as limited space,...
Top Stories
INSIDER: Design

Autonomous Freight Aircraft Achieves Design/Development Milestones
INSIDER: Manufacturing & Prototyping

Air Force Awards $100 Million to Continue B-1 Digital Engineering Program
INSIDER: Defense

Army Special Operations Forces Train with Robotic Combat Vehicles
INSIDER: Energy

Airbus’ High-Voltage Battery Technology Prepares for Flight Test
INSIDER: Manned Systems

Abort Motor for NASA’s Orion Spacecraft Successfully Tested
Articles: Imaging

Webcasts
On-Demand Webinars: Automotive
Get Even More Out of Your EVs with Thermoplastics
Podcasts: Manufacturing & Prototyping
Here's an Idea: 3D-Printed Lubrication System for Single-Use Engines