On-Line UPS Family

Falcon Electric, Inc., (Irwindale, CA) announced the addition of tower models to its on-line rackmount SC UPS family. The new 700VA to 3kVA tower-configured SC UPS protects IT/IoT equipment, telecommunications, servers, security systems, programmable logic controllers (PLCs) and other power-sensitive electronic systems against costly power disruptions.

Falcon's SC UPS models incorporate several important features including advanced digital signal processors (DSPs), surface mount device (SMD) technology, multi-mode operation, intelligent self-diagnostics and innovative battery boost circuits all at a low cost. The SC UPS also features 5-year long-life hot-swap batteries.

For Free Info Click Here 


Teledyne LeCroy (Chestnut Ridge, NY) recently introduced the WaveSurfer 510 oscilloscope, providing 1 GHz bandwidth and 10 GS/s sample rate simultaneously on all 4 channels. The WaveSurfer 510 combines the MAUI® with OneTouch user interface with powerful waveform processing, in addition to advanced math, measurement, and debug tools, to quickly analyze and find the root cause of problems.

The WaveSurfer 510 provides a high sample rate of 10 GS/s on all four channels, 32 Mpts of memory, sequence mode segmented memory, history mode waveform playback, 13 additional math functions, and two simultaneous math traces. As a result, WaveSurfer 510 performs advanced analysis on long captures with 10x oversampling to find the root cause of problems.

WaveSurfer 510 also features MAUI with OneTouch gesture control for common gestures such as drag, drop, pinch, and flick.

For Free Info Click Here 

Three-Phase Power Converter

Marotta Controls (Montville, NJ) presents the 1-STEP AC-DC Conversion™ solution. 1-STEP achieves three-phase Active Power Factor Correction (APFC), output regulation and electrical isolation in a single conversion step.

1-STEP meets key military and commercial avionics standards:

  • MIL-STD-704A-F: Aircraft power quality for 115 VAC, 3-phase, 400 Hz
  • MIL-STD-1399-300B for Type I Shipboard Power, 115 VAC, 3-phase, 60 Hz: The design is also adaptable for 440 VAC input voltage
  • DO-160G Sections 16: Power Input
  • DO-160G Sections 18 through 22: EMI/EMC
  • MIL-STD-461F: EMI/EMC requirements
  • A 2.6 kW version has been qualified for a Navy aircraft application (to MIL-STDs 461, 704 and 810)

For Free Info Click Here 

Pulsed L Band Multi KW Scalable Amplifier

Empower RF (Inglewood, CA) recently released its new Scalable Pulsed L Band Amplifier with an expandable system hardware architecture. Adding 3U power amplifier blocks is accomplished easily with no phase matching required.

Suitable for applications where the amplifier output power must maintain a set output level regardless of amplitude variations of the RF input signal level. This is accomplished by accurately measuring the RF output level and comparing it to a digital reference level, in real time, the reference is set by the user either through the front panel or as a SCPI command via the LAN port.

For Free Info Click Here 

Convection-Cooled Power Supplies

Excelsys Technologies (Cork, Ireland) announced that its CoolX600 Series of 600W convection-cooled modular power supplies is now available with the option of PMBus™ (Power Management Bus) communication. PMBus is an open standard power management protocol that offers system builders a standard way to communicate with power converters over a digital communications bus by providing a full set of commands and data structures required by power control and management components.

The convection-cooled CoolX600 Series delivers 600W of output power – without fan-assisted cooling – from a compact 8.5 x 4.5 x 1U package. Typical efficiency is greater than 93%. Other features include 4KV input surge immunity and the ability to withstand input voltages of up to 300VAC.

For Free Info Click Here 

Card Cage Front Panels and modules

The KM6 card cage family from Verotec (Manchester, NH) features three different systems, each optimized to suit a range of applications: KM6-II, KM6-RF and KM6-HD. Front panels, compatible with all KM6 versions, are a critical building block; three types are available: unshielded to IEC 60297, shielded to IEEE 1101.10 and a further design dedicated to the VXI architecture. Two and four rail modules, which can be fitted with top, bottom and side covers to enclose, screen and protect the PCB are available in 3U and 6U heights, 160 and 220mm depths and a range of widths from 10 to 42HP.

Iridite NCP conductive finish extruded shielded panels are fitted with a double swipe stainless steel EMC gasket. They are available as blank filler panels, with a fixed pull handle or with an improved design of injector/ejector latching handle. Shielded panels are available in 3U, 6U and 9U heights and 4, 5, 6, 8, 10 and 12HP widths as standard, other widths to order.

For Free Info Click Here 

AC-DC Power Supplies

TDK Corporation (Neptune, NJ) has introduced the PHV Series of Versatile Precision High Voltage Programmable AC to DC power supplies. The PHV Series covers the voltage range from 0-125 Volts to 0-300,000 Volts, at power levels from 14 Watts to 15,000 Watts, and offers High Accuracy, Low Ripple, High Stability outputs in a compact and lightweight switchmode design.

Standard models feature a fully instrumented front panel with 4½ digit DVMs for output voltage and current. Output Voltage and Current can be locally set via 10-turn potentiometers with precision dials, or via optional analog and/or digital interfaces. The front panel also features user adjustable OVP (overvoltage trip point) via a single turn screwdriver adjustable potentiometer.

Optional remote analog programming interfaces feature either ground referenced or isolated analog/digital controls and readbacks. The remote interface is located on the rear panel via a 15-pin D-sub connector. Signals include voltage/current programming and read-back, HV ON, Polarity Set, and CC/CV indicators.

For Free Info Click Here 

Multi-Channel RF Function Generators

Saelig Company, Inc. (Fairport, NY) has introduced the new MFG-2000 Series Multi-channel Function Generators from GWInstek that include the MFG-21XX entry-level models and the MFG-22XX advanced models with up to five functional channels. Channels 1 and 2 provide high-performance arbitrary function generators up to 60 MHz. Channel 3 - the RF signal generator channel, with output up to 320 MHz, is a full-function signal source; identical to CH1/CH2, it can output sine, square, ramp, pulse, noise, etc. as well as various RF modulation schemes such as AM/FM/PM/FSK/PWM, Sweep, Burst, Trigger.

Also included in each model is a 25 MHz pulse generator channel with adjustable pulse width, duty cycle, rising and falling edge time. Some models also feature a low-distortion 100 kHz Power Amplifier channel – ideal for audio signals. A 150 MHz Frequency Counter channel is available on some models too.

For Free Info Click Here 

i.MX6 Single Board Computer

Technologic Systems (Fountain Hills, AZ) has introduced its newest industrial single board computer, the TS-7970. The TS-7970 takes full advantage of the powerful features of i.MX6 NXP CPU based on the ARM Cortex A9 core. The TS-7970 features a power consumption of only 3 watts (typical), and fanless operation over the full industrial temperature range (-40° to +85°C). Offered standard with 4GB of eMMC, and up to 2GB of RAM, as well as a mSATA socket for upgrades. There is abundant I/O with Gigabit Ethernet, USB Host, USB Device, RS-232 Serial/COM Ports, RS-485 Serial Port, SPI Bus, I2C Bus, CAN Bus, Modbus, WiFi 802.11b/g/n, and Bluetooth 4.0+EDR. The TS-7970 also includes an FPGA on board for extending the feature set of the i.MX6 beyond what is offered by NXP.

For Free Info Click Here 

Four-Channel Time-to-Digital Converter

Precision Measurement Technologies (Clearwater, FL) is now offering the new TDC-GPX2 high-performance time-to-digital converter from AMS/Acam. The new converter delivers up to 10-picosecond resolution, with two- or four-channel modes. The high-performance device delivers a high update rate – up to 70 mega-samples per second – for drones, radar, LIDAR, PET scanner, automatic test equipment (ATE), photon counting and spectroscopy applications. The TDC-GPX2 has very low power consumption and is configured in a remarkably small 9 mm x 9 mm QFN64 package.

The compact TDC-GPX2 operates in two-channel or four-channel modes, achieving 70 mega-samples per second with 10-pS resolution, and 35 mega-samples per second with 20-pS resolution, respectively. Detection returns are five nanoseconds pulse-to-pulse in two-channel mode and 20 nanoseconds pulse-to-pulse in four-channel mode. It has an unlimited measuring range of 0s to 16s. It is designed without any locked loop technologies, and calculates all stop measurements inside, proportional to the applied reference clock.

For Free Info Click Here 

Remote I/O Unit

Aitech Defense Systems Inc. (Chatsworth, CA) has developed a new method of providing high performance, application-specific remote I/O management through the use of expansion modules, or “slices,” in the new rugged, space-qualified Ai-RIO. The remote I/O subsystem includes a Gb Ethernet port with precision time sync IEEE-1588 support, ten RS-422 ports (eight of which are RS-422/485), an additional eight LVDS or RS-422/485 UARTS as well as four SpaceWire ports with LVDS I/O, two CANbus ports and sixteen GPIO in two blocks of eight.

The compact, rugged Ai-RIO features a powerful radiation-qualified, dual-core PowerPC processor with two rad-tolerant FPGAs. All internal electronics are conduction-cooled and mechanically fixed and housed within a sealed, EMI/EMC Faraday cage for maximum thermal transfer. The housing is constructed of 6061/T6 flight grade aluminum and is based on a common 5.5” x 5.5” x 1.2” small form factor.

For Free Info Click Here 

Time and Frequency Module with On-Board GPS

VadaTech (Henderson, NV) recently announced the AMC005 Time and Frequency module with onboard GPS. The AMC005 provides a complete, feature-rich, GPS / PTP (1588) / IRIG / NTP bus-level timing solution to MicroTCA and ATCA systems. Precision UTC timestamps and GPS location/time/status are all made available via PCIe registers to the host CPU/application. GPS location, time and status data are available via backplane Ethernet Broadcast/Unicast with selectable bonding and failover. The AMC005 can demodulate IRIG Amplitude Modulated (AM) signals and receive/transmit IRIG DC Level Shift (DCLS) signals. The disciplined clock, 1PPS, divided-down clocks, IRIG DCLS, and time trigger may be output in any combination of the backplane clock channels. The module acts as a Grand-Master Clock or Clock Bridge between GPS / PTP (1588) / IRIG / NTP to provide enhanced flexibility to the system design.

For Free Info Click Here 

Software Interface Enhancements

Pentek, Inc., (Upper Saddle River, NJ) has introduced new features and enhancements to its Talon® SystemFlow® software. The optimized enhancements to SystemFlow benefit radar, SIGINT and communications recording applications.

SystemFlow is the software interface that is integrated into every Talon recorder. The software includes the graphical user interface (GUI) that is used to control the recorder with point-and-click configuration management, a client/server communication interface, NTFS file system support and an application programming interface (API) for custom user applications and control. Signal analysis tools include a virtual oscilloscope, spectrum analyzer, and spectrogram to monitor signals before, during, and after data collection.

For Free Info Click Here 

Axial-Leaded Aluminum Electrolytic Capacitor

Cornell Dubilier Electronics, Inc. (CDE) (Liberty, SC) has introduced a new line of axial-lead aluminum electrolytic capacitors. Continuous ripple current is rated at up to 28 amps RMS. Nine values are available, from 470 μF to 4,700 μF, with ratings from 25 VDC to 63 VDC. Maximum ESR ranges from 13 to 32 mΩ at 100 kHz.

Like other CDE capacitors, the AXLH Series is subject to the industry's most rigorous dynamic testing. Procedures outlined in MIL-STD-202, method 204 are used to record the 20g vibration tests. AXLH case diameter is a low-profile 20 mm for all values. Depending on values, lengths vary from 26.5 to 42.5 mm. The axial-lead wires are a substantial 1 mm.

For Free Info Click Here 

Linear Positioning Systems

Velmex (Bloomfield, NY) Linear UniSlide Assemblies are available in manual and motor driven models to meet a wide range of applications when reliable, precise linear motion is a requirement. UniSlide linear positioning systems also can be easily customized to fit exacting specifications. Constructed of a hard aluminum alloy ways and PTFE bearings for clean, precise movements, linear UniSlides deliver higher rigidity for longer life and more precise movement. They have a maximum load capacity up to 400 lbs. (181.5 kg.) horizontally and 100 lbs. (45.5 kg.) vertically. Straight line accuracy with precision lead screws is 0.0015” per 10” (0.033mm/20 cm).

Linear UniSlide stages are available in five manual series and five motor drive series. Each has an array of models/styles and sizes including Free Sliding, Screw Drive, Rapid and Fine Motion; Graduated Knob and Scale with Vernier. Left Right Screw Motion UniSlide stages feature two carriages (sliders) and are ideal for applications where two load objects must share a common axis of movement. Standard travel lengths of Velmex Linear UniSlide Assemblies range from 3” (7.62 cm) to 42” (107 cm). Read position from 0.025” to 1 micron using mechanical scale/vernier or encoder.

For Free Info Click Here 

Coaxial Voltage Variable Attenuators

Fairview Microwave Inc., (Allen, TX) has introduced a new line of voltage variable attenuators (VVAs) that offer up to 60 dB of attenuation across a broad range of frequencies from 400 MHz to 18 GHz.

This product line is comprised of six models that support frequencies from 400 MHz to 18 GHz while providing low insertion loss and a wide dynamic range. These modules display exceptional VSWR over all attenuation levels and CW input power is rated up to +23 dBm. Rugged coaxial packaged assemblies are designed to meet MIL-STD-202 environmental test conditions that include humidity, shock, and vibration.

For Free Info Click Here 

Small Form Factor SBC

Diamond Systems (Sunnyvale, CA) recently unveiled VENUS™, based on the Intel “Skylake” 6th Generation Core i7/i5 processor. Venus features DDR4 memory soldered on-board, bottom side conduction cooling, two PCIe Minicard sockets, in the 3.5” embedded form factor. Venus is available in two models, the high performance 2.6GHz i7 version (VNS766-4GD) and a lower cost 2.4GHz i5 model (VNS563-4GD).

Venus incorporates a full suite of rugged features such as soldered memory, latching connectors, and a thicker PCB, making it suitable for the most demanding vehicle applications. The 4GB soldered memory may be upgraded to as high as 20GB using Diamond's unique RSODIMM™ rugged memory modules, which are designed to withstand MIL-STD-202G shock and vibration specifications. Standard DDR4 SODIMM modules may also be used.

The board includes 6 USB 2.0/3.0 ports, 4 RS-232/422/485 serial ports, 16 digital I/O lines, two Gigabit Ethernet ports, HDA audio, Camera interface, and TPM support.

For Free Info Click Here 

Universal Testing Machine

Mecmesin (West Sussex, UK) recently announced the launch of the new OmniTest-5.0™ Universal Testing Machine. The OmniTest-5.0™ frame takes up relatively little bench space, and has an integrated cable management system and extended throat depth for testing of samples up to 200 mm in diameter. The OmniTest-5.0™ has a simple-to-use front panel for selection of test parameters live load and length readings and precise manual crosshead positioning using the multifunction controller.

Mecmesin's new generation of electronics gives active load control and improved motor performance giving a speed range from 0.01 mm/min to 1200 mm/min with a positional resolution of 0.001 mm. The OmniTest-5.0™ incorporates state of the art electronics and a new Enhanced Load Sensor (ELS). Load accuracy is 0.5% rdg with a resolution of 1:25000 allowing a wider range of tests to be performed without the need to select a different load sensor. The OmniTest-5.0™ is supplied with Mecmesin's new VectorPro™ MT material analysis software enabling testing to many internationally recognised standards to be carried out.

For Free Info Click Here