Sensors

Characterization of Bore Temperatures and Stresses in Small Caliber Gun Barrels

Currently in the small arms community, with the push for lighter, stronger barrels with improved life, a more complete understanding of the bore's thermal and structural behavior is required in order to not only improve future barrel design but to more thoroughly and accurately assess barrels in the current inventory.

Posted in: Briefs, Aerospace, Data Acquisition, Defense, Data Acquisition, Detectors, Sensors, Simulation Software, Instrumentation, Measuring Instruments, Test & Measurement
Read More >>

Modular Biosensor Patch

Researchers are identifying new biomarkers to help monitor cognition and stress in the human body and enhance human performance. Traditional biomarkers like heart rate, temperature, oxygen partial pressure, blood glucose, electrolyte concentration, and others have been correlated with cognition and stress states. However, the correlation is indirect. Molecular biomarkers with stronger and more specific links are preferred.

Posted in: Briefs, Aerospace, Defense, Fluid Handling, MEMs, Medical, Patient Monitoring, Biosensors, Data Acquisition, Detectors, Sensors
Read More >>

Synthetic Aperture Radar for Helicopter Landing in Degraded Visual Environments

The development of sensors to assist helicopter landing in degraded visual environments (DVEs) is currently an important US Army requirement addressing the Survivability of Future Vertical Lift Platforms program, one of the Army's modernization priorities.

Posted in: Briefs, Aerospace, Data Acquisition, Detectors, Sensors
Read More >>

Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison

As the medical community learns more about brain injury, the importance of blunt impact mitigation becomes more apparent. As such, it is critical to make sure that research labs are not only capable of performing testing in this field, but also show inter-laboratory consistency and reproducibility. This study is a comparison between the two validated blunt impact testing labs (Aberdeen Test Center (ATC) and National Technical Systems (NTS) Chesapeake Testing Services (CTS)), and Natick Soldier Research Development and Engineering Center (NSRDEC).

Posted in: Briefs, Aerospace, Data Acquisition, Defense, Data Acquisition, Inspection Equipment, Instrumentation, Measuring Instruments, Monitoring, Test & Measurement, Testing Procedures
Read More >>

Low-Cost Ground Sensor Network for Intrusion Detection

Perimeter surveillance of forward operating locations, such as Forward Arming and Refueling Points (FARPs), is crucial to ensure the survivability of personnel and materiel. FARPs are frequently located well outside the protective cover of the main forward operating bases. Therefore, they must provide their own organic perimeter defenses. Such defenses are manpower intensive. Research shows how cheap, remote, unattended sensors using commercial off-the-shelf (COTS) components can help reduce the manpower requirement for this task and yet not compromise the security of the operating location.

Posted in: Briefs, Aerospace, Defense, Electronic Components, Electronics, Electronics & Computers, Power Management, Power Supplies, Cameras, Imaging, Manufacturing & Prototyping, Materials, Mechanical Components, MEMs, Optical Components, Optics, Power, Power Transmission, Propulsion, Data Acquisition, Detectors, Sensors
Read More >>

Co-Prime Frequency and Aperture Design for HF Surveillance, Wideband Radar Imaging, and Nonstationary Array Processing

A co-prime array uses two uniform linear subarrays to construct an effective difference coarray with certain desirable characteristics, such as a high number of degrees-of-freedom for DOA estimation. In this research, the co-prime array concept has been generalized with two operations.

Posted in: Briefs, Aeronautics, Aerospace, Aviation, Defense, Electronic Components, Electronics, Electronics & Computers, Power Management, Imaging, Manufacturing & Prototyping, MEMs, Optical Components, Optics, Power, Antennas, RF & Microwave Electronics, Sensors
Read More >>

In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance

The effective distribution of offensive weapon capabilities to naval units at the tactical edge is a critical focus for Navy leaders. A direct byproduct of this priority is the need to employ sensor and data collection systems that can effectively guide the targeting of that offensive capability. In the recent past, wireless sensor networks have received limited use in the maritime domain due to the exploratory nature of technology, high system complexity and the high cost of system deployment. With the Internet-of-Things revolution, commercially available hardware and software components can be used to build low-cost, reliable, disposable wireless sensor networks that can leverage in-network processing schemes to greatly expand the intelligence collection footprint.

Posted in: Briefs, Aerospace, Communications, Wireless, Data Acquisition, Defense, Electronic Components, Electronics, Electronics & Computers, Internet of Things, Mechanical Components, MEMs, Sensors, Computer-Aided Design (CAD), Computer-Aided Engineering (CAE), Computer-Aided Manufacturing (CAM), Software
Read More >>

GPS Enabled Semi-Autonomous Robot

The primary objective of this research is to integrate GPS and local sensory data to allow a robot to operate semi-autonomously outside of a laboratory environment. The Pioneer 3-AT, a robust platform capable of operating in the outdoors, is utilized in this project. The P3-AT has acoustic sensors that can calculate distances to obstacles and encoders that calculate how much each wheel has turned. In a laboratory environment, sensory and encoder information can be used to triangulate position or measure distance and direction traveled from a known starting point. Operating outdoors limits the effectiveness of both systems as the obstacles are not known and wheels can often slip and slide on different surfaces. This necessitates external data to determine the location of the robot. GPS was chosen to provide that data. GPS, acoustic, and encoder data were integrated within MATLAB and provided control signals to the robot.

Posted in: Briefs, Aerospace, Communications, Data Acquisition, Defense, MEMs, Motion Control, Automation, Robotics, Data Acquisition, Sensors, Computer-Aided Design (CAD), Computer-Aided Engineering (CAE), Computer-Aided Manufacturing (CAM), Software, Transportation
Read More >>

Designing for Compressive Sensing: Compressive Art, Camouflage, Fonts, and Quick Response Codes

Compressive sensing (CS) is a relatively new field that has caused a lot of excitement in the signal processing community. It has superseded Shannon's time-honored sampling theorem, which states that the sampling rate of a signal must be at least twice its highest frequency. In CS, the necessary sampling rate depends on the sparsity of signal, not its highest frequency, reducing sampling requirements for many signals that exhibit natural sparsity. This compression happens on the hardware level, allowing systems to be designed with benefits ranging from increased resolution and frame rates to decreased power consumption and memory usage. Despite this enthusiasm for CS and the large quantity of research being performed, the number of commercial systems that use CS is relatively few. The problem of designing a CS strategy that increases functionality while actually reducing overall system cost has not been solved in many areas. This is a developing field where not only are new applications for CS still being developed, but also fundamental aspects of CS theory are still evolving.

Posted in: Briefs, Aerospace, Defense, Electronic Components, Electronics, Electronics & Computers, Energy, Energy Efficiency, Imaging, Fiber Optics, Optical Components, Optics, Data Acquisition, Sensors
Read More >>

Calculation of Weapon Platform Attitude and Cant Using Available Sensor Feedback

When firing artillery, there is typically a maximum angle that the platform cannot exceed relative to the Earth plane. This is due to the large recoil forces involved and the risk of destabilizing the platform the weapon is mounted to. Mobile systems are particularly sensitive to this as the attitude of the platform relative to Earth is constantly changing. A simple solution is to add pitch and roll sensors directly to the platform. However, many mobile systems already have an assortment of sensors that can be used to calculate the platform attitude.

Posted in: Briefs, Aeronautics, Aerospace, Aviation, Data Acquisition, Defense, Mechanical Components, MEMs, Data Acquisition, Sensors, Transportation
Read More >>