MEMs

Diesel Frigate Engines

Fairbanks Morse
Beloit, WI
1-800-356-6955
www.fairbanksmorse.com

Fairbanks Morse - an EnPro Industries company - has been awarded a contract to deliver eight FM | Colt-Pielstick diesel engines to power four frigates for the Royal Saudi Navy. The purchase is a part of the Saudi Naval Expansion Program II which has been in the works for over a decade with a cost of about $20 billion.

Posted in: Application Briefs, Defense, Manufacturing & Prototyping, Power Transmission
Read More >>

3D Printed Spacecraft Parts

Stratasys Ltd.
Eden Prairie, MN
952-937-3000
www.stratasys.com/aerospace
Phoenix Analysis and Design
Technologies (PADT) Tempe, AZ
1-800-293-PADT
www.padtinc.com

Stratasys Ltd., a company that specializes in applied additive technology solutions, and Phoenix Analysis & Design Technologies, Inc. (PADT) have teamed up with Lockheed Martin Space to deliver next-generation 3D printed parts for NASA's Orion deep-space spacecraft. Key to the project are Stratasys advanced materials – including an ESD variant of the new Antero™ 800NA, a PEKK-based thermoplastic offering high performance mechanical, chemical, and thermal properties.

Posted in: Application Briefs, Aerospace, Defense, Thermal Management, 3 D Printing & Additive Manufacturing, Manufacturing & Prototyping, Materials, Plastics
Read More >>

Optical Seeker for Munitions Systems

BAE Systems
Nashua, NH
603-885-4321
www.baesystems.com

The U.S. Defense Advanced Research Projects Agency (DARPA), through the U.S. Air Force Research Laboratory, has awarded BAE Systems a $13.1 million contract to demonstrate a new, cost-effective optical seeker for precision-guided munitions. The seeker is designed to improve navigation, as well as automate target location and homing, for different types of munitions that are used in GPS-denied and other contested environments.

Posted in: Application Briefs, Defense, Lasers & Laser Systems, Optical Components, Optics, Propulsion, Automation
Read More >>

Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section

The objective of this research was to hydraulically pressurize the internal diameter of one 102mm Polymer Matrix Composite (PMC) over-wrapped cylinder up to 25,000 pounds per square inch (psi) and during pressurization, in real time, collect and store pressure and strain data simultaneously. Strain data must be captured from the inside diameter of the oil filled metallic cylinder and from the outside diameter of the composite over-wrap material.

Posted in: Briefs, Aerospace, Data Acquisition, Electronic Components, Electronics, Electronics & Computers, Manufacturing & Prototyping, Composites, Materials, Metals, Joining & Assembly, Mechanical Components, Inspection Equipment, Instrumentation, Measuring Instruments, Monitoring, Test & Measurement
Read More >>

Permeation Tests on Polypropylene Fiber Materials

The Toxic Industrial Chemical/Toxic Industrial Material (TIC/TIM) Task Force MFR#1 published in February 2009 focuses on inhalation hazards in an operational environment and provides a list of compounds prioritized based on toxic hazard and the likelihood of an encounter. With these types of vapor threats, cartridge-based air purifying respirators are used to protect the warfighter against chemical exposure. Traditional air purification materials often rely on porous carbons such as activated carbon or activated charcoal. Ongoing efforts seek to improve the performance of carbon materials in air purification applications as well as provide alternative materials.

Posted in: Briefs, Aerospace, Data Acquisition, Alternative Fuels, Energy, Energy Efficiency, Energy Harvesting, Energy Storage, Renewable Energy, Materials, Nanotechnology
Read More >>

Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison

As the medical community learns more about brain injury, the importance of blunt impact mitigation becomes more apparent. As such, it is critical to make sure that research labs are not only capable of performing testing in this field, but also show inter-laboratory consistency and reproducibility. This study is a comparison between the two validated blunt impact testing labs (Aberdeen Test Center (ATC) and National Technical Systems (NTS) Chesapeake Testing Services (CTS)), and Natick Soldier Research Development and Engineering Center (NSRDEC).

Posted in: Briefs, Aerospace, Data Acquisition, Defense, Data Acquisition, Inspection Equipment, Instrumentation, Measuring Instruments, Monitoring, Test & Measurement, Testing Procedures
Read More >>

DARPA-Boeing Spaceplane Completes Engine Tests

Boeing and DARPA are collaborating to design, build, and test a technology demonstration vehicle for the agency’s Experimental Spaceplane program. The Phantom Express would reinvent space missions for commercial and government customers by providing rapid, aircraft-like access to space. Within minutes, the autonomous, reusable spaceplane would launch its upper stage to deploy small satellites into low Earth orbit. It would then land on a runway to be prepared for its next flight.

Posted in: INSIDER, News, Aeronautics, Aerospace, Aviation, Defense
Read More >>

Forget Joysticks – Use Your Torso to Pilot Drones

Imagine piloting a drone using the movements of your torso only and leaving your head free to look around, much like a bird. Your torso is more intuitive – and more precise – than joysticks for piloting drones, according to a recent study. Work is already underway to implement this new body-machine interface technology for search and rescue with drones.

Posted in: INSIDER, News, Aeronautics, Aerospace, Aviation, Defense, Motion Control, Motors & Drives, Positioning Equipment
Read More >>

Warhead Life-Extension Program Passes Key Milestone

The program to extend the life of the W80 nuclear warhead recently achieved a significant milestone when the National Nuclear Security Administration (NNSA) gave passing grades to the plans to refurbish certain components and the proposed approach to developing component cost estimates. Passing the milestone confirms that the life extension program (LEP), dubbed the W80-4 LEP, remains on track. The refurbished warhead will be paired with a new cruise missile that is being developed in parallel by the U.S. Air Force, making this the first life extended warhead to be implemented in a new delivery system since the start of the Stockpile Stewardship Program more than 25 years ago.

Posted in: INSIDER, News, Defense, Materials, Monitoring, Test & Measurement
Read More >>

AgilePod Flies on U.S. Air Force MQ-9 Reaper

In March 2018, the Air Force Life Cycle Management Center’s Sensors Program Office, working jointly with the AFLCMC Medium Altitude Unmanned Aerial Systems Program Office, sponsored three demonstration flights of an MQ-9 Reaper with AgilePod. The flights were a first for AgilePod on an Air Force major weapon system, and were the result of collaboration between AFLCMC and the Air Force Research Lab.

Posted in: INSIDER, News, Aerospace, Data Acquisition, Defense, Data Acquisition, Detectors, Sensors
Read More >>