MEMs

Unmanned Aerial Refueling Aircraft

General Atomics Aeronautical Systems, Inc.
Poway, CA
858-312-2810
www.ga-asi.com

General Atomics Aeronautical Systems, Inc. (GA-ASI) is using an integrated fuel tank structure to maximize fuel offload for the proposed MQ-25 unmanned aerial refueling aircraft for the U.S. Navy. GA-ASI applied its knowledge of advanced composite aircraft structures to develop integrated fuel tanks in a large-scale wing box test article and a full-scale wing skin pre-production validation article.

Posted in: Application Briefs, Aeronautics, Aerospace, Aviation, Defense, Fluid Handling, Mechanical Components, Simulation Software, Software, Instrumentation, Measuring Instruments, Monitoring, Test & Measurement
Read More >>

Military Vehicle Situational Awareness System

Computech International (CTI)
Tikva, Israel
+972-3-9211110
www.cti-intl.com

Computech International (CTI), a company that specializes in advanced, unique military IT and communication solutions for the harshest conditions, recently introduced OCTOPUS 360, a situational awareness system designed for use by combat teams in closed-hatched vehicles in hostile environments.

Posted in: Application Briefs, Data Acquisition, Defense, Imaging, Visualization Software, Data Acquisition, Sensors, Monitoring
Read More >>

Burner Rig Testing of A500® C/SiC

There is growing interest in developing, testing, and deploying ceramic-matrix composites (CMCs) into commercial and military aerospace gas turbine engines due to their durability under extreme conditions and weight-savings potential. For military applications, the focus is on the afterburning section of the turbine engine, including the flameholder, augmentor liner, and both the convergent and divergent segments of the exhaust nozzle. These are demanding applications because of the high temperatures and rapid thermal cycles.

Posted in: Briefs, Aerospace, Composites, Materials, Instrumentation, Measuring Instruments, Monitoring, Test & Measurement
Read More >>

Space Debris Orbit and Attitude Prediction for Enhanced and Efficient Space Situational Awareness

This research deals with the problem of modelling the orbit and attitude motion of uncontrolled manmade objects in orbit about the Earth, which tumble due to the natural influences of the near-Earth space environment. A mathematical, physics-based and computational approach is taken to model the forces and torques that drive the orbit and attitude evolution of such objects. The main influence modelled is solar radiation pressure (SRP), which is the interaction of solar electromagnetic radiation with the surface of an object, leading to both forces and torques that influence the orbital and attitude motion. Other influences, such as the gravitational field of the Earth, are also modelled.

Posted in: Briefs, Aerospace, Imaging, Materials, Simulation Software, Transportation
Read More >>

Maintaining Enterprise Resiliency Via Kaleidoscopic Adaption and Transformation of Software Services (MEERKATS)

This research investigates a new vision for increasing the resilience of computing clouds by elevating continuous change, evolution, and misinformation as first-rate design principles of the cloud's infrastructure. The work is motivated by the fact that today's clouds are very static, uniform, and predictable, allowing attackers who identify a vulnerability in one of the services or infrastructure components to spread their effect to other, mission-critical services. The goal is to integrate into clouds a new level of unpredictability for both their services and data so as to both impede an adversary's ability to achieve an initial system compromise and, if a compromise occurs, to detect, disrupt, and/or otherwise impede their ability to exploit this success.

Posted in: Briefs, Aerospace, Data Acquisition, Defense, Computers, Electronic Components, Electronics & Computers, Software
Read More >>

Fundamental Aspects of Single Molecule and Zeptomole Electroanalysis

The objective of this research program was to provide the fundamental understanding required for using the principles of electroanalytical chemistry to detect target molecules at very low concentration, including single molecules, with high specificity, simplicity, and low power.

Posted in: Briefs, Aerospace, Defense, Materials, Nanotechnology, Inspection Equipment, Instrumentation, Measuring Instruments, Monitoring, Test & Measurement, Testing Procedures
Read More >>

3 Key Benefits: Better Corrosion Resistance, Fatigue Life, Part Integrity

Electropolishing has become a common metal finishing process used in the aerospace industry to help improve the overall quality of metal components. These components come in many forms including high-performance fasteners, fittings, nozzles, housings, and welded assemblies. In order to maintain reliable performance, these components must be precisely manufactured and have an impeccable surface finish that is free of burrs and other contaminants.

Posted in: News, News, Aeronautics, Aerospace, Aviation, Consumer Product Manufacturing, Custom & Contract Manufacturing, Manufacturing & Prototyping, Coatings & Adhesives, Materials, Metals, Joining & Assembly, Mechanical Components
Read More >>

Preventing Premature Part Failures with Electropolishing

Design engineers in the aerospace industry are constantly challenged to improve fit and function of components used in commercial and military aircraft. Parts used in these aircraft must withstand high-stress, corrosive conditions with long-term use. They also must meet highly demanding cycle life specifications.

Posted in: News, News, Aeronautics, Aerospace, Aviation, Government, Consumer Product Manufacturing, Custom & Contract Manufacturing, Manufacturing & Prototyping, Coatings & Adhesives, Materials, Joining & Assembly, Machinery, Mechanical Components
Read More >>

Advantages of Electropolishing for Penetrant Testing

It’s common, especially in the aerospace industry, for parts that are fracture critical to be Liquid Penetrant Inspected (LPI) prior to installation. Also known as Dye Penetrant Inspection (DPI) or simply Penetrant Testing (PT), this method is used to detect micro-cracks or other defects that could serve as an initiation site for failure. In order to properly execute a penetrant test, the surface of a metal part must be thoroughly clean of any debris, smeared metal, or any amorphous layer that may be hiding a hairline crack, thus yielding a false reading.

Posted in: News, News, Aeronautics, Aerospace, Aviation, Materials, Metals, Test & Measurement
Read More >>

3D-Printed Turbine Extends Drone Power

A cooled, radial gas turbine was developed that provides thousands of hours of electricity to an unmanned aerial vehicle (UAV), a significant improvement to current UAV turbines that only operate a few hundred hours before wearing out.

To create the small, intricate design with internal air passages, engineers used selective laser melting, which builds metal parts layer by layer.

Source

Posted in: News, Defense
Read More >>