Maintaining Enterprise Resiliency Via Kaleidoscopic Adaption and Transformation of Software Services (MEERKATS)

This research investigates a new vision for increasing the resilience of computing clouds by elevating continuous change, evolution, and misinformation as first-rate design principles of the cloud's infrastructure. The work is motivated by the fact that today's clouds are very static, uniform, and predictable, allowing attackers who identify a vulnerability in one of the services or infrastructure components to spread their effect to other, mission-critical services. The goal is to integrate into clouds a new level of unpredictability for both their services and data so as to both impede an adversary's ability to achieve an initial system compromise and, if a compromise occurs, to detect, disrupt, and/or otherwise impede their ability to exploit this success.

Posted in: Briefs, Aerospace, Data Acquisition, Defense, Computers, Electronic Components, Electronics & Computers, Software

Compact Power Amplifier Solution for Electronic Warfare

Wolfspeed, a Cree company, provides field-tested silicon carbide (SiC) and gallium nitride (GaN) power and RF solutions. As a leader in wide-bandgap semiconductor technology, Wolfspeed partners with designers to build faster, smaller, lighter, and more powerful electronic systems.

Posted in: Articles, Aerospace, Defense, Board-Level Electronics, Power Management, Power Supplies, Materials, Machinery, Mechanical Components, Power, Power Transmission, RF & Microwave Electronics, Semiconductors & ICs

Detecting Drones with Doppler-Based Radar

As drones become more commonplace, the need to secure facilities from the high-definition cameras and potential dangerous payloads has caused a rapid growth of counter-drone technologies.

Posted in: Articles, Aeronautics, Aerospace, Aviation, Data Acquisition, Energy, Antennas, RF & Microwave Electronics, Data Acquisition, Sensors

Burner Rig Testing of A500® C/SiC

There is growing interest in developing, testing, and deploying ceramic-matrix composites (CMCs) into commercial and military aerospace gas turbine engines due to their durability under extreme conditions and weight-savings potential. For military applications, the focus is on the afterburning section of the turbine engine, including the flameholder, augmentor liner, and both the convergent and divergent segments of the exhaust nozzle. These are demanding applications because of the high temperatures and rapid thermal cycles.

Posted in: Briefs, Aerospace, Composites, Materials, Instrumentation, Measuring Instruments, Monitoring, Test & Measurement

Space Debris Orbit and Attitude Prediction for Enhanced and Efficient Space Situational Awareness

This research deals with the problem of modelling the orbit and attitude motion of uncontrolled manmade objects in orbit about the Earth, which tumble due to the natural influences of the near-Earth space environment. A mathematical, physics-based and computational approach is taken to model the forces and torques that drive the orbit and attitude evolution of such objects. The main influence modelled is solar radiation pressure (SRP), which is the interaction of solar electromagnetic radiation with the surface of an object, leading to both forces and torques that influence the orbital and attitude motion. Other influences, such as the gravitational field of the Earth, are also modelled.

Posted in: Briefs, Aerospace, Imaging, Materials, Simulation Software, Transportation

Bringing RF into the Embedded World: It's Time

Embedded systems have been almost entirely digital throughout their long history, while RF and microwave technologies were separate subsystems with no effective interface between the two. For many reasons, this “RF/digital divide” should finally be connected.

Posted in: Articles, Aerospace, Defense, Board-Level Electronics, Computers, Electronic Components, Electronics, Electronics & Computers, RF & Microwave Electronics

Fundamental Aspects of Single Molecule and Zeptomole Electroanalysis

The objective of this research program was to provide the fundamental understanding required for using the principles of electroanalytical chemistry to detect target molecules at very low concentration, including single molecules, with high specificity, simplicity, and low power.

Posted in: Briefs, Aerospace, Defense, Materials, Nanotechnology, Inspection Equipment, Instrumentation, Measuring Instruments, Monitoring, Test & Measurement, Testing Procedures

Unmanned Aerial Refueling Aircraft

General Atomics Aeronautical Systems, Inc.
Poway, CA

General Atomics Aeronautical Systems, Inc. (GA-ASI) is using an integrated fuel tank structure to maximize fuel offload for the proposed MQ-25 unmanned aerial refueling aircraft for the U.S. Navy. GA-ASI applied its knowledge of advanced composite aircraft structures to develop integrated fuel tanks in a large-scale wing box test article and a full-scale wing skin pre-production validation article.

Posted in: Application Briefs, Aeronautics, Aerospace, Aviation, Defense, Fluid Handling, Mechanical Components, Simulation Software, Software, Instrumentation, Measuring Instruments, Monitoring, Test & Measurement

New Products: October 2018 Aerospace & Defense Technology

Microstepping Motor Driver

US Digital (Vancouver, WA) announced the release of the MD3 Programmable Microstepping Motor Driver, capable of driving motors from NEMA size 14 to 42. The MD3 accepts 9-50 VDC power inputs and is rated for currents up to 7A continuous duty. In addition to digital input controls, the MD3 can be configured and controlled using the open MODBUS RTU protocol over a RS485 bus. A GUI application is supplied that allows many settings to be changed including the number of microsteps per full step, acceleration/deceleration rates, speed and current cutback. The design supports multiple MD3 units on the same RS485 bus and allows for programmable motion profiles. In addition, the MD3 has a brushed DC motor speed control mode.

Posted in: Products, Aeronautics, Aerospace, Data Acquisition, Board-Level Electronics, Computers, Electronic Components, Electronics, Electronics & Computers, Power Management, Motion Control, Motors & Drives, Positioning Equipment, Power, RF & Microwave Electronics, Data Acquisition

Preventing Premature Part Failures with Electropolishing

Design engineers in the aerospace industry are constantly challenged to improve fit and function of components used in commercial and military aircraft. Parts used in these aircraft must withstand high-stress, corrosive conditions with long-term use. They also must meet highly demanding cycle life specifications.

Posted in: News, News, Aeronautics, Aerospace, Aviation, Government, Consumer Product Manufacturing, Custom & Contract Manufacturing, Manufacturing & Prototyping, Coatings & Adhesives, Materials, Joining & Assembly, Machinery, Mechanical Components