Materials

Meeting Environmental Objectives and Regulations

Gone are the days when the impact of products on the environment or human health were optional business concerns. Regulatory constraints on materials and chemicals are increasing, and many companies struggle to respond – and to do so quickly and efficiently. Restrictions on hexavalent chrome are one well-known example. Another is REACH – the European Union regulation concerning the Registration, Evaluation, Authorisation & restriction of Chemicals – which applies to products that are either manufactured in, or imported into, the EU. Companies are under obligations to report the use of restricted substances, and to limit or avoid their use.

Posted in: Articles, Aerospace Manufacturing and Machining, Aerospace, Government, Environmental Monitoring, Manufacturing & Prototyping, Coatings & Adhesives, Materials, Data Acquisition, Computer-Aided Design (CAD)
Read More >>

Improving Component Life in Abrasive, Corrosive Aerospace Environments

In industries such as aerospace, characterized by extreme operating environments that push materials and components to the edge of their design capabilities, companies are challenged to continually seek economically viable ways to maintain and improve performance.

Posted in: Articles, Aerospace, Coatings & Adhesives, Materials
Read More >>

Taming the Thermal Behavior of Solid-State Military Lasers

Laser diodes and laser diode arrays (LDAs) are widely used throughout military systems, for sighting and range finding, but also at high power levels as offensive and defensive weapons. In companion with much higher-power chemical lasers, these high-power optical sources can generate kilowatts of optical power (as arrays) for use in neutralizing incoming missiles, rockets, and armaments and for long-distance offensive strikes. But laser diodes are also still inefficient, and a great deal of the energy supplied to a laser diode or an LDA is converted into heat, which must be safely dissipated to ensure a long operating lifetime for the solid-state devices.

Posted in: Articles, Aerospace, Board-Level Electronics, Electronics & Computers, Power Management, Thermal Management, Ceramics, Materials, Metals, Packaging, Lasers & Laser Systems, Optics, Photonics, Semiconductors & ICs
Read More >>

How Additive Manufacturing is Changing the Aerospace Industry

Additive manufacturing was invented more than 30 years ago and, from small beginnings in prototyping, has developed and grown into a $6 billion industry. While additive manufacturing for aerospace and defense has seen slower adoption than some other industries, the velocity is now visibly increasing. This has been enabled by the ongoing development of additive technologies that apply more increasingly to aerospace and defense -namely better plastics materials, faster 3D printing technologies, focused development of metals materials, and resulting technologies and processes that are increasingly easier to get qualified.

Posted in: Articles, Aerospace Manufacturing and Machining, Aerospace, 3 D Printing & Additive Manufacturing, Manufacturing & Prototyping, Rapid Prototyping & Tooling, Materials, Metals
Read More >>

First Air-Worthy Metal-Printed RF Filter Ready for Takeoff

Within the aerospace industry, 2016 and onwards could be looked upon as the tipping point for direct metal printing (DMP), as the technology increasingly made the jump beyond prototyping to production parts and assemblies ready for flight.

Posted in: Articles, Aerospace, Communications, 3 D Printing & Additive Manufacturing, Manufacturing & Prototyping, Materials, Metals, RF & Microwave Electronics
Read More >>

Designing With Plastics for Military Equipment

U.S. soldiers carry loads of equipment and protective gear that can weigh anywhere from 45 to 130 pounds. This is more than enough to quickly tire even the most well-conditioned personnel, contributing to reduced mobility and impaired decision-making that could result in casualties.

Posted in: Articles, Aerospace, Defense, Manufacturing & Prototyping, Composites, Materials, Metals, Plastics
Read More >>

Nett Warrior

Nett Warrior is the US Army's next generation US integrated soldier system that replaces Land Warrior. It is designed to be an integrated dismounted situational awareness and mission command system for use during combat operations that enables fast and accurate decision-making during tactical operations.

Posted in: Articles, Aerospace, Communications, Defense, Board-Level Electronics, Electronic Components, Electronics, Electronics & Computers, Composites, Materials, Metals
Read More >>

Developing a Conformal Coating Process for Aerospace Applications

Conformal coatings protect electronic circuits from harsh environments via a chemical film that “conforms” to a circuit board’s topography. These coatings protect against moisture, chemicals, contamination, vibration, corrosion, and thermal stress while improving product reliability by reducing failures. The benefits conformal coating can provide often vary in importance by industry. In aerospace electronics there is an emphasis on benefits of protection from corrosive gasses, outgassing, tin whiskers, and radiation. For the purpose of this article, we will focus on liquid coating materials.

Posted in: Articles, Aerospace Manufacturing and Fabrication, Aerospace, Defense, Coatings & Adhesives, Materials
Read More >>

New Products & Services: December 2017 Aerospace Manufacturing & Fabrication

Metric-Sized Metal Shapes

Parker Steel Company (Maumee, OH) offers metric-sized metals suitable for applications where presized metric parts are needed. Parker Steel’s cold-finished carbon steel, alloyed and high-strength stainless steel, aluminum, copper, brass and tool steel bars/shafting, tubing, sheets and plates, angles, channels and tees; and other specialty shapes can be shipped out the same day as ordered with very few exceptions.

Posted in: Articles, Aerospace, Manufacturing & Prototyping, Coatings & Adhesives, Materials, Metals, Data Acquisition, Detectors, Sensors, Computer-Aided Design (CAD), Simulation Software, Software, Measuring Instruments, Monitoring, Test & Measurement, Product development, Fabrication, Steel
Read More >>

Using Thermoplastic Composites for Aerospace Applications

Recent advancements in composite production and processing are making thermoplastics a viable option in a wider array of aerospace applications.

Posted in: Articles, Aerospace, Manufacturing & Prototyping, Composites, Materials, Composite materials, Thermoplastics
Read More >>