Electronics & Computers

Understanding Virtex FPGAs

With each new generation of FPGA devices, Xilinx continues to push the performance envelope to match the ever-increasing requirements of target applications. The recent announcement of the Virtex-6 is no exception. More processing power, lower power consumption and updated interface features to match the latest technology I/O requirements are all part of the new devices. While it might be easy to assume that faster, bigger, more powerful is better, it’s important to understand how the latest FPGA innovations actually deliver this higher performance to best match the device to the specific requirements of the application.

Posted in: Articles, Articles, Electronics & Computers, Architecture, Integrated circuits
Read More >>

Applying Embedded Form Factors to Wireless Systems

Wireless connectivity is merging with technological advancements in silicon, signaling, mass storage and software to meet the high-performance, ultra-low power requirements for next-generation wireless systems. Embedded form factors, seeking to utilize these developing technologies to the best advantage of system designers, continue to evolve by providing enhanced capabilities while simultaneously reducing form factor footprints. As wireless connectivity becomes increasingly ubiquitous, the volume of embedded systems that utilize wireless is expanding. This perpetuates the demand for higher processing power with minimal power draw and size.

Posted in: Application Briefs, Application Briefs, Embedded Technology, Board-Level Electronics, Electronics & Computers, Architecture, Computer software / hardware, Embedded software, Wireless communication systems
Read More >>

SUMIT™ Expansion Modules

VersaLogic Corp. (Eugene, OR) has developed two expansion modules that feature the Stackable Unified Module Interconnect Technology (SUMITTM) interface scheme. These PC/104-sized modules are suitable for systems that need a small (3.65" × 3.8") footprint. Expansion boards may be added, including PCI Express (PCIe) lanes, USB ports, LPC, SPI, and SMB. For legacy applications, the accessory cards are also equipped with a PC/104 ISA feed-through connector.

Posted in: Products, Products, Board-Level Electronics, Electronics & Computers
Read More >>

EBX-Sized Single Board Computer

The EBC-Z8510-G single board computer (SBC) from WinSystems (Arlington, TX) is powered by an Intel 1.1GHz AtomTM processor. It measures 203mm × 147mm and supports the SUMIT-ISM I/O expansion standard plus COMIT (Computer On Module Interconnect TechnologyTM). The interface features two Gigabit Ethernet ports, CRT and LVDS flat panel video, a MiniPCIe card interface for a wireless networking module, four USB 2.0 ports, four serial COM ports, HD audio, PATA controller for both a CompactFlash and hard disk, 48 lines of digital I/O, LPT, and a PS/2 port for keyboard and mouse. Additional I/O module expansion is supported with two SUMIT and legacy PC/104 connectors. This RoHS-compliant board operates over a temperature range of -40 to +70°C.

Posted in: Products, Products, Electronics & Computers
Read More >>

COM Express ModuleCOM Express Module

ADLINK Technology, Inc. (San Jose, CA) has introduced the Express-ATC, a “Compact” COM Express module that is compatible with the Type 2 pin-out of the PICMG® COM Express specification. The module is suitable for systems that require a full set of graphics features in a small package (95mm × 95mm), including medical diagnostics, medical imaging, gaming, industrial automation, test and measurement, and industrial control.

Posted in: Products, Products, Electronics & Computers
Read More >>

48-Channel PCIe Digital I/O Card

ACCES I/O Products (San Diego, CA) now offers the PCIe-DIO-48S, a 48-channel PCI Express (PCIe) card designed for use in a variety of digital I/O applications. It is compatible with 8255 PPI (mode 0) and features a x1 lane PCIe connector that can be used in any x1 or higher PCI Express slot. It is suitable for use in applications sensing inputs such as switch closures, TTL, LVTTL, CMOS logic and controlling external relays.

Posted in: Products, Products, Electronics & Computers
Read More >>

18-Pin Microcontrollers

Microchip Technology (Chandler, AZ) has introduced the PIC16(L)F1826 and PIC16(L)F1827 general-purpose 8-bit microcontrollers that feature the company’s enhanced mid-range core. The new MCUs provide an advanced peripheral set that includes an mTouchTM capacitive touch sensing and dual I2C/SPI interfaces, along with “LF” versions featuring low power consumption via Microchip’s nanoWatt XLP eXtreme Low-Power technology. Key features include a maximum frequency of 32 MHz, up to 7 KB Flash, up to 384 Bytes of SRAM, and an operating voltage of 1.8 to 5.5 V.

Posted in: Products, Products, Electronics & Computers
Read More >>

Low-Power Circuit for an Electromagnetic Warning System Sensor

Low-power sensors are important to the Army for monitoring infrastructure of the lifecycle of an operation. Isotope batteries can power and operate compact, low-power sensors for decades. A lowpower circuit has been developed to generate a repetitive radio frequency (RF) impulse, which will be used to indicate that a sensor has detected a target. This sensor circuit has been modeled and built to evaluate several isotope batteries in preparation. A parametric study of components in the circuit has been performed to minimize power consumption as a function of repetition rate and pulse width of the light-emitting diode indicator or RF impulse output.

Posted in: Briefs, Electronics & Computers, Batteries, Integrated circuits, Radio equipment, Sensors and actuators, Test equipment and instrumentation
Read More >>

Effects of Differing Carbon Nanotube Field-Effect Transistor Architectures

Understanding the differing methods and materials that can be used for producing carbon nanotube (CNT)- based electronic components means an informed use of materials and architectures can unleash the potential of carbon nanotube field-effect transistors (CNTFETs) for a wide array of future electronic applications.

Posted in: Briefs, Electronics & Computers, Architecture, Electronic equipment, Transistors, Nanomaterials
Read More >>

Silicon Carbide Junction Field-Effect Transistor Devices for Scalable Solid-State Circuit Breakers

Power electronic converters functioning as components in high-power systems, such as those of hybrid military ground vehicles, require fast fault isolation, and in most cases, benefit additionally from bidirectional fault isolation. To prevent converter damage or failure, fault current interrupt speeds in the hundreds of microseconds to few millisecond range are necessary. Presently used mechanical contactors do not provide adequate actuation speeds, and suffer severe degradation during repeated fault isolation. Instead, it is desired to use a large array of semiconductor devices having a collectively low conduction loss to provide large current-handling capability and fast transition speed for current interruption.

Posted in: Briefs, Electronics & Computers, Power electronics, Transistors, Semiconductors
Read More >>