Latest Stories
Technology Report Power
Automaker Coalition Plans High-Power Charging Network to Rival Tesla's
In an announcement that could change the balance of power in the still-formative EV charging- station race, seven global automakers said they will work together to...
News Manufacturing & Prototyping
Tenneco Opens Engineering, Simulation Center in Poland
Suspension- and powertrain-components specialist Tenneco recently opened a new 9,600 sq.m (103,334-sq.ft.) European engineering center at Gliwice in Poland to serve its European...
Technology Report Electronics & Computers
Fully Charged in Six Minutes?
Battery technology company Nyobolt and UK-based design and engineering consultancy Callum are collaborating on a demonstration of new lithium-ion battery tech that would permit the full charge of a vehicle...
Briefs Aerospace
Bullet Impact Testing of Ammunition and Explosives at Picatinny Arsenal
Bullet impact (BI) is a standard test used to assess ordnance during insensitive munitions (IM) testing, for hazard classification, and for safety evaluations.
Briefs Test & Measurement
Update on Machine-Learned Correctness Properties
Despite the potential advantages to be derived from employing autonomous systems, evidence-based assurance of dependability is a key to obtaining users’ trust in these systems.
Briefs Aerospace
Test Methods for Measuring High Temperature Tensile Properties of Subscale Specimen Geometries for Additively Manufactured Metallic Materials
With the rise of additive manufacturing for metallic materials, concerted efforts are underway to integrate the technology into present and future aerospace systems to enhance performance capability, reduce cost, and minimize production lead-times.
News Propulsion
Magna Shows off Electric Offroad Powertrain, In-Cabin Tech
If a mid-20th century engineer could time travel and see Magna’s electric off-road powertrains, they might ask “why is the rear differential so gigantic?” But that’s no...
Briefs Test & Measurement
Methodologies and Equipment for Measuring High Temperature Tensile Properties of Subscale Specimen Geometries for Additively Manufactured Metallic Materials (Continued)
Despite the existence of standards, the issue persists where, in general, equipment is unavailable to measure maximum bending strains at elevated test temperatures.
Briefs Manufacturing & Prototyping
Repeatability and Reproducibility of a Standard Test Method for Measuring Head-Supported Mass Properties
During development of military helmets and HMDs, materiel developers need a valid and repeatable test methodology for measuring their mass properties.
News Power
Mazda’s Revived Rotary Engine Starts Production
Mazda, the automaker with the longest and richest history of using the Wankel rotary engine announced on June 22, 2023 that it resumed mass production of rotary engines for a new variant...
Technology Report Energy
Toyota to Add Battery Lab at Michigan R&D Campus
Toyota will invest nearly $50 million for a new automotive battery lab at its R&D headquarters in York Township, Michigan. The lab is expected to be operational in 2025, the same year...
News Regulations/Standards
SAE to Standardize Tesla NACS Charging Connector
SAE International confirmed today that it will standardize the Tesla-developed North American Charging Standard (NACS) charging connector for EVs. The global engineering organization that...
News Automotive
Study: Information Desert Leaves Many Suppliers in EV Dust Bowl
Inadequate information about domestic and Japanese automakers’ product timelines and strategic plans relating to the transition from ICE-powered vehicles to EVs has...
Briefs Materials
Physics-Guided Neural Network for Regularization and Learning Unbalanced Data Sets
Directed energy deposition (DED) is a method of metal additive manufacturing (AM) by which parts are built layer by layer from 3-D computer-aided design models.
Briefs Internet of Things
Context-Aware Visual Search Using a Pan-Tilt-Zoom Camera
Introduced here is the formal PTZ Search Problem. In the PTZSP, a fixed PTZ camera starts at a given PTZ position and must move through the continuous 3D space of PTZ coordinates to detect as many objects of interest as possible as quickly as possible.
Briefs Communications
Automated Atmospheric Correction of Nanosatellites Using Coincident Ocean Color Radiometer Data
Researchers present a machine-learning-based method for utilizing traditional ocean-viewing satellites to perform automated atmospheric correction of nanosatellite data.
Briefs Unmanned Systems
Characterizing Motion Prediction in Small Autonomous Swarms
Prior investigations of swarm robot control focus on optimizing communication and coordination between agents, with at most one human control scheme, or with discrete (rather than continuous) human control schemes.
Briefs Data Acquisition
ADS-B Classification Using Multivariate Long Short-Term Memory
The increase in available data has resulted in the study of identifying trends becoming more and more prevalent in multiple facets of society to include commerce and government.
Briefs Aerospace
Analysis of Pathways to Reach Net Zero Naval Operations by 2050
This report is based on a broad study of strategies for the Department of the Navy to achieve net zero global emissions by 2050 to comply with recent Executive Orders and goals.
Briefs Aerospace
Leveraging COTS Products for Maneuverable Aerial Identification
Ground troops are equipped with identification-friend-or-foe devices. When they are engaged in a firefight, they seek cover and concealment, and consequently, their attached IFF are also covered and concealed.
Briefs Unmanned Systems
Robust MADER: Decentralized Multiagent Drone Trajectory Planner
For reliable real-world deployment, it is essential that a trajectory planner be robust to both communication delays and dynamic environments.
Briefs Weapons Systems
Autonomous Surveillance Technologies Relating to Dismounted Soldiers
The development of the AI/ML applications for dismounted Soldier systems is paramount to defeating our adversaries, such as China and Russia, in future combat.
Technology Report Electronics & Computers
WCX 2023: New Chinese EVs Feature ASSB Tech
By the end of 2023 there will be 10 Chinese electric passenger vehicles using advanced semi-solid-state batteries (ASSB) — an industry-first application for EVs and a milestone for vehicle...
News Software
The Challenging Legal Environment of AI
“Holy cats. What happens when this stuff goes wrong?”
Briefs Photonics/Optics
Overcoming Performance Limitations of Distributed Brillouin Fiber Laser Sensors
Distributed fiber sensors are a powerful tool for structural health monitoring and environmental sensing due to their ability to remotely monitor the strain at 1,000s of locations using low-cost optical fiber.
Briefs Robotics, Automation & Control
Drift Improvement with Reinforcement Training of Inertial Sensors
The main objective of the DIRT-I project is to extend the holdover time of inertial sensors in the absence of a Global Navigation Satellite System.
Briefs RF & Microwave Electronics
Stepped-Frequency Distributed Radar for Through-the-Wall Sensing
The authors are studying the application of distributed radar to through-the-wall sensing.
Briefs Aerospace
Electro-Optic Materials Research
Here, a summary of the main lines of effort for the Electro-Optics Materials Research program including its goals and major accomplishments of the past five years.
Briefs RF & Microwave Electronics
Multi-Scale Structuring of the Polar Ionosphere
Ionospheric variability is a critical consideration for communication systems, GNSS, and space asset management.
Top Stories
INSIDERWeapons Systems
The B-21 Raider Starts Flight Testing - Mobility Engineering Technology
INSIDERTest & Measurement
Turkey's KAAN Combat Aircraft Completes First Flight - Mobility Engineering...
INSIDERRegulations/Standards
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines -...
INSIDERElectronics & Computers
New Video Card Enables Supersonic Vision System for NASA's X-59 Demonstrator -...
ArticlesPower
Rim-Driven Electric Aircraft Propulsion - Mobility Engineering Technology
INSIDERManufacturing & Prototyping
Army Ends Future Attack and Reconnaissance Helicopter Development Program -...
Webcasts
Automotive
How to Safely Control the Power to Your Vehicle
Software
Digital Twins and Simulation for Accelerated Automotive Product...
Automotive
EV Bodyshop Metrology: The Same but Different
Manufacturing & Prototyping
Integrating Additive Manufacturing Into Aerospace Production
Aerospace
From Data to Decision: How AI Enhances Warfighter Readiness