Miniature Six-Axis Load Sensor for Robotic Fingertip
A miniature load sensor has been developed as a prototype of tactile sensors that could fit within fingertips of anthropomorphic robot hands. The sensor includes a force-and-torque transducer in the form of a spring instrumented with at least six semiconductor strain gauges. The strain-gauge wires are secured to one side of an interface circuit board mounted at the base of the spring. This board protects the strain-gauge wires from damage that could otherwise occur as a result of finger motions.
On the opposite side of the interface board, cables routed along the neutral axis of the finger route the strain-gauge output voltages to an analog-to-digital converter (A/D) board. The A/D board is mounted as close as possible to the strain gauges to minimize electromagnetic noise and other interference effects. The outputs of the A/D board are fed to a controller, wherein, by means of a predetermined calibration matrix, the digitized strain-gauge output voltages are converted to three vector components of force and three of torque exerted by or on the fingertip.
This work was done by Myron A. Diftler and Toby B. Martin of Johnson Space Center, Michael C. Valvo and Dagoberto Rodriguez of Lockheed Martin Corp., and Mars W. Chu of Metrica, Inc. MSC-23910-1
Top Stories
INSIDERWeapons Systems
The B-21 Raider Starts Flight Testing - Mobility Engineering Technology
INSIDERTest & Measurement
Turkey's KAAN Combat Aircraft Completes First Flight - Mobility Engineering...
INSIDERRegulations/Standards
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines -...
INSIDERElectronics & Computers
New Video Card Enables Supersonic Vision System for NASA's X-59 Demonstrator -...
ArticlesPower
Rim-Driven Electric Aircraft Propulsion - Mobility Engineering Technology
INSIDERManufacturing & Prototyping
Army Ends Future Attack and Reconnaissance Helicopter Development Program -...
Webcasts
Automotive
How to Safely Control the Power to Your Vehicle
Software
Digital Twins and Simulation for Accelerated Automotive Product...
Automotive
EV Bodyshop Metrology: The Same but Different
Manufacturing & Prototyping
Integrating Additive Manufacturing Into Aerospace Production
Aerospace
From Data to Decision: How AI Enhances Warfighter Readiness